Recommendations for the quantitative analysis of landslide risk
By: Corominas, J.; van Westen, C.; Frattini, P.; et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT Volume: 73 Issue: 2 Special Issue: SI Pages: 209-263 Published: MAY 2014
DOI: https://doi.org/10.1007/s10064-013-0538-8
Times Cited: 253 |
|
A Review of Distributed Optical Fiber Sensors for Civil Engineering Applications
By: Barrias, Antonio; Casas, Joan R.; Villalba, Sergi
SENSORS Volume: 16 Issue: 5 Published: MAY 2016
DOI: https://doi.org/10.3390/s16050748
Times Cited: 132
|
Capability of microalgae-based wastewater treatment systems to remove emerging organic contaminants: A pilot-scale study
By: Matamoros, Victor; Gutierrez, Raquel; Ferrer, Ivet; et al.
JOURNAL OF HAZARDOUS MATERIALS Volume: 288 Pages: 34-42 Published: MAY 15 2015
DOI: https://doi.org/10.1016/j.jhazmat.2015.02.002
Times Cited: 93 |
Emerging organic contaminant removal in a full-scale hybrid constructed wetland system for wastewater treatment and reuse
By: Avila, Cristina; Bayona, Josep M.; Martin, Isabel; et al.
Conference: 5th International Symposium on Wetland Pollutant Dynamics and Control (WETPOL) Location: Nantes, FRANCE Date: OCT 13-17, 2013
ECOLOGICAL ENGINEERING Volume: 80 Special Issue: SI Pages: 108-116 Published: JUL 2015
DOI: https://doi.org/10.1016/j.ecoleng.2014.07.056
Times Cited: 61 |
Thermo-poro-mechanical analysis of landslides: from creeping behaviour to catastrophic failure
By: Alonso, E. E.; Zervos, A.; Pinyol, N. M.
GEOTECHNIQUE Volume: 66 Issue: 3 Pages: 202-219 Published: MAR 2016
DOI: https://doi.org/10.1680/jgeot.15.LM.006
Times Cited: 53 |
The material point method for unsaturated soils
By: Yerro, A.; Alonso, E. E.; Pinyol, N. M.
GEOTECHNIQUE Volume: 65 Issue: 3 Pages: 201-217 Published: 2015
DOI: https://doi.org/10.1680/geot.14.P.163
Times Cited: 53 |
Trends in large-deformation analysis of landslide mass movements with particular emphasis on the material point method
By: Soga, K.; Alonso, E.; Yerro, A.; et al.
GEOTECHNIQUE Volume: 66 Issue: 3 Pages: 248-273 Published: MAR 2016
DOI: https://doi.org/10.1680/jgeot.15.LM.005
Times Cited: 52 |
Assessment of the mechanisms involved in the removal of emerging contaminants by microalgae from wastewater: a laboratory scale study
By: Matamoros, Victor; Uggetti, Enrica; Garcia, Joan; et al.
JOURNAL OF HAZARDOUS MATERIALS Volume: 301 Pages: 197-205 Published: JAN 15 2016
DOI: https://doi.org/10.1016/j.jhazmat.2015.08.050
Times Cited: 50 |
Long term impacts of cold CO2 injection on the caprock integrity
By: Vilarrasa, Victor; Olivella, Sebastia; Carrera, Jesus; et al.
INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL Volume: 24 Pages: 1-13 Published: MAY 2014
DOI: https://doi.org/10.1016/j.ijggc.2014.02.016
Times Cited: 48 |
|
Lagrangian analysis of multiscale particulate flows with the particle finite element method
By: Onate, Eugenio; Angel Celigueta, Miguel; Latorre, Salvador; et al.
COMPUTATIONAL PARTICLE MECHANICS Volume: 1 Issue: 1 Pages: 85-102 Part: 1 Published: MAY 2014
DOI: https://doi.org/10.1007/s40571-014-0012-9
Times Cited: 45
|
Atmospheric Phase Screen Compensation in Ground-Based SAR With a Multiple-Regression Model Over Mountainous Regions
By: Iglesias, Ruben; Fabregas, Xavier; Aguasca, Albert; et al.
IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING Volume: 52 Issue: 5 Pages: 2436-2449 Published: MAY 2014
DOI: https://doi.org/10.1109/TGRS.2013.2261077
Times Cited: 44 |
|
Results of the eruptive column model inter-comparison study
By: Costa, A.; Suzuki, Y. J.; Cerminara, M.; et al.
JOURNAL OF VOLCANOLOGY AND GEOTHERMAL RESEARCH Volume: 326 Special Issue: SI Pages: 2-25 Published: OCT 15 2016
DOI: https://doi.org/10.1016/j.jvolgeores.2016.01.017
Times Cited: 41
|
An approach to enhance efficiency of DEM modelling of soils with crushable grains
By: Ciantia, M. O.; Arroyo, M.; Calvetti, F.; et al.
GEOTECHNIQUE Volume: 65 Issue: 2 Pages: 91-110 Published: 2015
DOI: https://doi.org/10.1680/geot.13.P.218
Times Cited: 40 |
Deep enclosures versus pumping to reduce settlements during shaft excavations
By: Pujades, Estanislao; Vazquez-Sune, Enric; Carrera, Jesus; et al.
ENGINEERING GEOLOGY Volume: 169 Pages: 100-111 Published: FEB 4 2014
DOI: https://doi.org/10.1016/j.enggeo.2013.11.017
Times Cited: 40 |
Vulnerability assessment for reinforced concrete buildings exposed to landslides
By: Mavrouli, O.; Fotopoulou, S.; Pitilakis, K.; et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT Volume: 73 Issue: 2 Special Issue: SI Pages: 265-289 Published: MAY 2014
DOI: https://doi.org/10.1007/s10064-014-0573-0
Times Cited: 36 |
Field and laboratory analysis of the runout characteristics of hillslope debris flows in Switzerland
By: Huerlimann, Marcel; McArdell, Brian W.; Rickli, Christian
GEOMORPHOLOGY Volume: 232 Pages: 20-32 Published: MAR 1 2015
DOI: https://doi.org/10.1016/j.geomorph.2014.11.030
Times Cited: 31 |
Multi-scale analysis of cone penetration test (CPT) in a virtual calibration chamber
By: Butlanska, Joanna; Arroyo, Marcos; Gens, Antonio; et al.
CANADIAN GEOTECHNICAL JOURNAL Volume: 51 Issue: 1 Pages: 51-66 Published: JAN 2014
DOI: https://doi.org/10.1139/cgj-2012-0476
Times Cited: 31 |
Large-Scale Rock Slope Failures in the Eastern Pyrenees: Identifying a Sparse But Significant Population in Paraglacial and Parafluvial Contexts
By: Jarman, David; Calvet, Marc; Corominas, Jordi; et al.
GEOGRAFISKA ANNALER SERIES A-PHYSICAL GEOGRAPHY Volume: 96 Issue: 3 Special Issue: SI Pages: 357-391 Published: SEP 2014
DOI: https://doi.org/10.1111/geoa.12060
Times Cited: 29 |
A local constitutive model for the discrete element method. Application to geomaterials and concrete
By: Onate, Eugenio; Zarate, Francisco; Miquel, Juan; et al.
COMPUTATIONAL PARTICLE MECHANICS Volume: 2 Issue: 2 Pages: 139-160 Published: JUN 2015
DOI: https://doi.org/10.1007/s40571-015-0044-9
Times Cited: 28 |
PFEM-based modeling of industrial granular flows
By: Cante, J.; Davalos, C.; Hernandez, J. A.; et al.
COMPUTATIONAL PARTICLE MECHANICS Volume: 1 Issue: 1 Pages: 47-70 Part: 1 Published: MAY 2014
DOI: https://doi.org/10.1007/s40571-014-0004-9
Times Cited: 28 |
A methodology to obtain the block size distribution of fragmental rockfall deposits
By: Ruiz-Carulla, Roger; Corominas, Jordi; Mavrouli, Olga
LANDSLIDES Volume: 12 Issue: 4 Pages: 815-825 Published: AUG 2015
DOI: https://doi.org/10.1007/s10346-015-0600-7
Times Cited: 27 |
DEM modelling of cone penetration tests in a double-porosity crushable granular material
By: Oryem Ciantia, Matteo; Arroyo, Marcos; Butlanska, Joanna; et al.
COMPUTERS AND GEOTECHNICS Volume: 73 Pages: 109-127 Published: MAR 2016
DOI: https://doi.org/10.1016/j.compgeo.2015.12.001
Times Cited: 26 |
Incorporation of paper sludge in clay brick formulation: Ten years of industrial experience
By: Cusido, J. A.; Cremades, L. V.; Soriano, C.; et al.
APPLIED CLAY SCIENCE Volume: 108 Pages: 191-198 Published: MAY 2015
DOI: https://doi.org/10.1016/j.clay.2015.02.027
Times Cited: 26 |
Design of FRC tunnel segments considering the ductility requirements of the Model Code 2010
By: Liao, Lin; de la Fuente, Albert; Cavalaro, Sergio; et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY Volume: 47 Pages: 200-210 Published: MAR 2015
DOI: https://doi.org/10.1016/j.tust.2015.01.006
Times Cited: 26 |
Shear strength of rock joints influenced by compacted infill
By: Indraratna, Buddhima; Premadasa, Wuditha; Brown, Edwin T.; et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES Volume: 70 Pages: 296-307 Published: SEP 2014
DOI: https://doi.org/10.1016/j.ijrmms.2014.04.019
Times Cited: 23 |
